The minimum system requirements are a PowerPC G3 processor at 333MHz with 128MB RAM and 6MB or hard drive space. It works with OS X 10.2 or later and Sarari 1.0 or later.

Download

• location
• Download the disk image, it should automatically decompress and mount itself.
• Once the download has completed, proceed to the next Step

Install

1. After downloading the OOIDA ISP High Speed installer, you will see an icon as shown below in the installer volume. Double-clicking on the icon will launch the installer.
   
   
2. The installer will guide you through the complete setup process
   
   

Connect

1. As this is your first time launching the product, you will be prompted for a username and password. Enter the username and password provided to you by your ISP in the fields provided. (Example: username@pngusa.net)
   
   
   
2. Click OK. OOIDA ISP High Speed will connect to the sever
3. After launching the OOIDA ISP High Speed, you will see the following icon in the dock
   
   

Browse the Web

1. Browse the web as you normally would
2. When finished, simply close your web browser, as you normally would, and OOIDA ISP High Speed will remain idle
3. If you want to stop the application after browsing select Stop OOIDA ISP High Speed from the applications menu, or if you desire to exit the application all together click Quit from the application menu

Launching OOIDA ISP High Speed

If the OOIDA ISP High Speed is not running and you need to launch it manually, locate the OOIDA ISP High Speed icon in the Applications folder and double-click it

Setting Username and Password Information

Your username and password information is located in the Connection Status dialog. To set your username and password:

1. Click on the OOIDA ISP High Speed dock icon
2. Click on the "Connection" tab
   
   
   
3. Enter your username and password in the fields provided. To avoid having to do this each time you connect, ensure that the "Save password" box is checked
4. To save your settings, press "Apply"

Changing the Image Quality Settings

The image quality setting changes the quality of images that appear in your OOIDA ISP High Speed. The higher the quality you select, the longer it will take to load. For slower Internet connections, it is recommended that you lower you image quality. This slider can be adjusted anytime while browsing.

1. Click on the OOIDA ISP High Speed dock icon
2. Select the "Image Quality" tab
3. Use the slider bar to adjust the image quality setting
4. Pres "Apply" to save the settings
   
   

Starting and Stopping

To Stop:

If you are connected and you want to manually disconnect, click on the OOIDA ISP High Speed dock icon. Select the menu item "Stop OOIDA ISP High Speed" from the application menu-bar

To Start:

If the OOIDA ISP High Speed is stopped and you want to manually start, click on the OOIDA ISP High Speed dock icon. Select menu item "Start OOIDA ISP High Speed" from the application menu-bar.

Changing Your Connection Settings

Normally, the connection settings that are set during installation do not need to be changed. If however, your ISP provides new connection settings, you may change the preset ones using the "Settings" dialog.

1. Click on the OOIDA ISP High Speed dock icon
2. Click on the "Connection" tab
   
   
   
3. Press "Advanced..."
   
   
   
4. Change the "Remote Server Hostname" and "Server Port" to the ones your ISP provided you. In most cases, it is unnecessary to change the "Local Port'
5. Press "OK" to close the "Connection" dialog box
6. Press "Apply" to save your new connection settings. These settings will be used next time you connect with OOIDA ISP High Speed.

Accessing Product Version Information

You may view the product version in the About dialog.

1. Click on the OOIDA ISP High Speed dock icon
2. Select "About OOIDA ISP High Speed" from the application menubar

Uninstalling OOIDA ISP High Speed

1. Quit the OOIDA ISP High Speed
2. Launch the finder and browse to the /Applications folder
3. Drag the accelerator icon to the trash can